Furman PL-PRO II - Power Conditioners/Conditioners

SMP+ (Series Multi-Stage Protection Plus)
Furmanâ€™s SMP+ surge suppression virtually eliminates service calls. Traditional surge suppression circuits sacrifice themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so with SMP+. With Furmanâ€™s SMP+, damaging transient voltages are safely absorbed, clamped and dissipated - no sacrificed parts, no service calls, no down time.

Unique to Furmanâ€™s SMP+ is its unparalleled clamping voltage, even when tested beyond the grueling specifications of - USA/CIDAâ€™s A-1-1 test. While other designs offer clamping voltages that are well above 300VAC peak (far beyond long accepted professional standards), Furmanâ€™s SMP+ clamps at 188VAC peak, 133 VAC RMS even when tested with multiple 6000VAC - 3000 Amp surges! This unprecedented level of protection is only available with Furmanâ€™s SMP+ technology.

LiFT (Linear Filtering Technology)
Unfortunately, traditional AC filter/conditioners have been designed for unrealistic laboratory conditions. Prior technologies could actually harm audio and video performance more than they help, due to the resonant peaking of their antiquated, non-linear designs. Under certain conditions, these designs can actually add more than 10 dB of noise to the incoming AC line! Worse still, lost digital data, the need to reboot digital presets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminating the equipment ground. Furmanâ€™s SMP+ with LiFT takes another approach, ensuring optimal performance through linear filtering and no leakage to ground.

Features:
The PL -PRO II and PL-PRO D II feature LED rack lights which produce virtually no heat and provide an extremely long life span. A dimmer control for the rack lights allows the user to adjust the level of illumination or simply switch the lights off.

Additionally, all units include a rear mounted BNC jack which accepts any standard (12VAC, 0.5A) gooseneck lamp for rear rack illumination, as well as a front panel switch which controls the gooseneckâ€™s operation. A front panel mounted master power switch is protected by a hinged cover, preventing accidental disconnection of AC power to the unitâ€™s outlets. The front-panel circuit breaker - power switch can be quickly and easily reset should the unit be overloaded. Furmanâ€™s Series II Pro units also feature a 10 foot, 12 gauge heavy-duty power cable.

PL-PRO II Features:

Operating Voltage:
90 to 140 VAC

Over Voltage Shutdown:
140 VAC typically

Spike Protection Modes:
Line to neutral, zero ground leakage

Spike Clamping Voltage
188 VAC peak @ 3,000 Amps, 133 VAC RMS
(tested to UL-1449 and USA / CIDA A-1-1, 6,000 VAC @ 3,000 Amps)

Response time:
1 nanosecond

Maximum surge current:
6,500 amps

Noise attenuation:
10 dB @ 10 kHz, 40 dB @ 100 kHz, 100 dB @ 10 MHz
Linear attenuation curve from 0.05 - 100 Ohms line impedance

Dimensions:
1.75â€ H x 19â€ W x 10.5â€ D.

Weight:
11 lbs. (5 kg.)

Construction:
Steel chassis, .125â€ brushed and black anodized aluminum front panel;
glass epoxy printed circuit boards

Power consumption:
11 watts

Safety Agency Listings:
CE, NRTL-C